PEA & LENTIL • Powder Inoculant

One 4.7 kg pail of this product can treat up to 16 ha (40 acres) of pea and faba bean seeds and 24 ha (60 acres) of lentil seeds.

1. Ensure the seed treating equipment has been properly calibrated and that applicator’s tank is clean.
2. Pour the required quantity of water in the applicator’s tank.
3. Pour the content of one pail of this product and mix well.
4. Maintain the slurry under agitation during the application.
5. Do not leave product in the tank for more than 4 hours.

Recommendations

• The product may “bulk up” seeds. It is recommended to calibrate the seeder to ensure correct seeding rate is attained.
• Do not mix this product and fungicide seed treatments in the same tank. Apply to seed sequentially or once treatment is dry.
• Do not mix this product with granular fertilizers.
• Pesticide use: refer to the complete list of compatible pesticides.

Dry application:

Mix this product evenly with seeds when filling seeder using grain auger or directly in the hopper or other container.

Damp application:

Pre-moisten seeds with 300 ml of water/100 kg (3 fl. oz/bu) of seeds. Mix the damp seeds thoroughly with the inoculant to ensure even coating.

Slurry application:

Pour one pail of 4.7 kg of this product in a clean container. Add gradually 8 - 10 litres (2 - 2.6 US gallons) of clean, nonchlorinated water and stir well. Add more water if the slurry is too thick. Pour onto the seeds and mix thoroughly to ensure even coating.

Recommendations

• The product may “bulk up” seeds. It is recommended to calibrate the seeder to ensure correct seeding rate is attained.
• Do not mix this product and fungicide seed treatments in the same tank. Apply to seed sequentially or once treatment is dry.
• Do not mix this product with granular fertilizers.
• Pesticide use: refer to the complete list of compatible pesticides.