Description
- Size: 4.7 kg (10.3 lb) pail
- Ingredients: Mycorrhizae, rhizobium, peat powder
- Particle Size: < 1 mm (18 mesh)
- Bulk Density: 400 g/L (1 lb/US dry qt)
Toolbox
Directions for use
Dry application
One 4.7 kg pail of this product covers 40 acres (16 ha) of seeds.
Mix evenly with seeds at the bottom of the grain auger while filling drill, or directly in the drill box. Ensure uniform seed coverage is obtained. Apply at 300 g/ha (120 g or 4.2 oz/acre).
Recommendations
- For optimum results, it is recommended to seed within the 8 hours following coating with this product.
- This product may “bulk up” seeds. It is recommended to calibrate the seeder to ensure correct seeding rate is attained.
- Do not mix this product and fungicide seed treatments in the same tank. Apply to seed sequentially or once treatment is dry.
- Do not mix this product with granular fertilizers.
- Pesticide use: refer to the complete list of compatible pesticides.
Slurry application
One 4.7 kg pail of this product covers 40 acres (16 ha) of seeds.
Pour one 4.7 kg pail in a clean container. Gradually add 8 - 10 litres of clean, non-chlorinated water and stir well. Add more water if the slurry is too thick. Pour onto the seeds and mix thoroughly to ensure even coating.
Recommendations
- For optimum results, it is recommended to seed within the 8 hours following coating with this product.
- This product may “bulk up” seeds. It is recommended to calibrate the seeder to ensure correct seeding rate is attained.
- Do not mix this product and fungicide seed treatments in the same tank.
- Apply to seed sequentially or once treatment is dry.
- Do not mix this product with granular fertilizers.
Specifications
Active ingredients
MYCORRHIZAE – PTB297 Technology
Rhizophagus irregularis (formerly known as Glomus intraradices)
2 750 viable spores/g
1 248 500 viable spores/lb
RHIZOBIUM – PTB162 Technology
Bradyrhizobium japonicum
2.5 x 109 active cells/g
1.1 x 1012 active cells/lb
Storage and handling
- Store in a cool, dry place, out of direct sunlight
- Do not freeze or expose to temperatures above 25°C (77°F)
- Avoid severe temperature variation
- Open package only when ready to use
- Respect the best before date on the label
- Product may cause irritation in people with allergies to microorganisms, or immunocompromised individuals.
- Handle in a well-ventilated area.
- Avoid generating dust during manipulation or wear an approved respirator and goggles.
- Avoid inhalation and direct contact with the eyes and open wounds.
- If inhaled, provide fresh air.
- If skin contact, wash with soap and water.
- If eye contact, rinse the eyes immediately and thoroughly with water.
